Chain Mount
1. Screw the circular ring tightly.
2. Fix the luminaire with chain to the ceiling.
3. Use the buckle to fix the safety rope with the body and chain.
4. Connect the wires.
Hook Mount
1. Screw the circular ring tightly.
2. Please hang the fixture into the lifting hook and protect it from failing. Make sure the hook can bear over 3 times weight of the fixture.
3. Use the buckle to fix the safety rope with the body and hook.
4. Connect the wires.
Warning
1. Please make sure the power off before operation.
2. An approval strain relief suitable for used in 3C*18AWG SJTW cord shall be provided to end of flexible cord which is connected to branch circuit.
SAFETY INSTRUCTION
Read through this manual before installation, please keep this manual for future using.
Handle the product with care.
The product must be properly grounded.
THIS PRODUCT MUST BE INSTALLED INACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF PRODUCT AND THE HAZARDS INVOLVED.
Turn OFF the power before installation.
Check that voltage is compatible with fixture driver. Please make sure the wiring section is insulated.
Make sure the products are securely installed.
Make sure the construction is strong enough to support the products.
MAINTENANCE CAUTION
1.Review the diagrams before beginning and make sure fixture is grounded properly.
2 Turn power off and wait for fixture cooling to operate.
3. Maintenance must be done by professionals.
4. Clean the dusk on the surface and heat sink with dry cloth regularly to keep good heat dissipation.
5. Suitable for operation location use.
6. Suitable for operation in ambient not exceeding 55℃
LED Street Light
